Zessqaa Black Series 2-Channel Car Amplifier MS-802
Only 1 left in stock
- Compatibility guidance before purchase
- Response target: within 4 business hours
- Secure Cashfree payments
Pay via UPI, Cards, or Net Banking — powered by Cashfree.
Complete your setup
Most buyers pair this with a vehicle-matched source unit or bass upgrade for better overall balance.
Built to look premium, hit cleanly, and feel intentional inside modern car interiors.
Dedicated support, guided troubleshooting, and a clearer post-purchase path.
The Zessqaa Black Series 2-Channel Car Amplifier (MS-802) gives two speakers, or one subwoofer, clean MOSFET power: 60W x 2 RMS at 4 Ohm, 80W x 2 RMS at 2 Ohm, and 170W x 1 RMS bridged at 4 Ohm. Maximum power is 4800W as printed on the unit.
Works with your stereo, factory or aftermarket
Most factory stereos have no RCA output. The MS-802 has a speaker-level (high-level) input, so it connects straight to the factory speaker wires. Aftermarket stereos plug into the RCA low input, and the RCA line out passes the signal on to a second amplifier.
What you can tune
- Gain: match the amp to your stereo's output
- Low-pass filter: on/off switch, 40 Hz to 150 Hz, for running a subwoofer or bass tube
- Super Bass: OFF, 6 dB or 12 dB
- Protection: built-in protection circuit with an ON/PROTECTION LED, and an onboard 25A fuse
Key specifications
| Model | MS-802 (Black Series) |
| Channels | 2, bridgeable to 1 |
| Power (RMS) | 60W x 2 @ 4 Ohm, 80W x 2 @ 2 Ohm, 170W x 1 bridged @ 4 Ohm |
| Max power | 4800W (as printed) |
| Frequency response | 20 Hz to 20 kHz |
| THD | under 0.1% |
| S/N ratio | over 92 dB |
| Input level | 0.2V to 6V |
| Inputs / outputs | High-level input, RCA low input, RCA line out |
| Operating voltage | 9V to 16V |
| Fuse | 25A onboard |
| Dimensions | 23 x 18 x 5.6 cm |
| Weight | about 1.8 kg |
| Warranty | 1 year manufacturer warranty |
Frequently asked questions
How is this different from the ZQ-802 Gold Series?
They're different amplifiers. The MS-802 adds a speaker-level input for factory stereos, an RCA line out, a low-pass filter with an on/off switch and a 3-step Super Bass switch.
Can it run a bass tube or subwoofer?
Yes. Bridge the two channels for 170W x 1 RMS at 4 Ohm and switch the low-pass filter on.
What's in the box?
1 x Zessqaa Black Series 2-Channel Car Amplifier (MS-802). Wiring kit not included.
Questions before you buy? WhatsApp us at +91-9312226771 or email support@zessqaa.com
